Want to monitor your car's 12v battery? Is your EV's 12v battery dropping too low without warning? Our 12v Wi-Fi based battery monitor (voltmeter) is for you.

Unlike common Bluetooth battery monitors, our unique 12v battery monitor is Wi-Fi based. This allows you to get alerts over the internet, from the smartphone app, when your vehicle is parked at home (or other location where it has Wi-Fi & Internet access) when your 12v battery is too low. You get to select the alert range values AND the alert messages.

That's right, this is an Internet-enabled 12v battery monitor, which allows you to remotely monitor your vehicle's 12v battery, and get smartphone alerts when your desired voltage range is too low (e.g. drops below 12v).

Features:

1. Wi-Fi (Internet) enabled 12v battery monitor / voltmeter unit
2. Monitor your car's 12v battery via the modern smartphone companion app, compatible with Android and Apple smartphones (the app receives regular updates)
3. Able to connect up to 2 different Wi-Fi networks (e.g. 1 at home and 1 at work, or 1 at home, and to a mobile phone hot-spot).
4. Able to remotely monitor your vehicle's 12v battery from interstate, or overseas, or any internet connected location, provided your vehicle is within range of one of your saved Wi-Fi networks on the device.
5. By purchasing additional 12v Wi-Fi battery monitors, you can monitor multiple vehicles, each monitored from within the smartphone app
6. You can set multiple unique voltage alerts, e.g. one for when the 12v battery goes below 12.0v, another for reaching 11.9v, one for 11.85 volts, and so on.
7. With each alert, you can set custom messages. For example, "Your EV's 12v battery has dropped to 11.9v. Quick, charge it!".
8. Voltage values are automatically graphed within the app, to give you a history of your vehicle's 12v battery voltage fluctuations.

It comes complete with:

• the 12v Wi-Fi Voltmeter / Battery monitor, housed in a small ABS box
• 50cm power lead (simple 2-wire hook-up)
• full printed Aussie instructions, including wiring & app setup steps.

Access is through the smartphone app (available for both the Android and Apple platforms) allow you to set custom alerts (e.g. when your battery drops below a voltage of your choice), and the app also graphs a history of your vehicle's 12v battery voltage.

Mounting the unit can be achieved through the base mounting holes (BYO cable ties, screws, or electrical tape).

Quick start instructions (FULL printed Aussie instructions are included within your Express Post package):

1. Unpack your 12v Wi-Fi Voltmeter battery monitor product
2. After your product arrives, unpack it, and pick a suitable location in your vehicle for installation (a constant 12v power source is the boot or cabin, is essential)
3. Connect the device to your vehicle's 12v power source. Please add a fuse in-line (not included), if you are tapping into a power source that does not already have a fuse.
4. The 12v Wi-Fi Voltmeter / Battery Monitor will start up within about 30 seconds
5. Use the viewing hole on the side of the device, to check the red LED inside, is illuminating.
6. Download the smartphone app (detailed instructions are included with your device)
7. Create a free account within the app, using a valid email address
8. Follow the supplied instruction sheet to add the 12v Wi-Fi Voltmeter / Battery Monitor, into your app account.
9. Configure the 12v WiFi Voltmeter / Battery Monitor features, including the Wi-Fi network it's going to connect to, device name, alert values and alert messages.
10. If you have purchased multiple 12v Wi-Fi Voltmeter / Battery Monitors, repeat the above steps, to add your additional devices, into your app's account.
11. Sit back, and watch the device monitor and graph your vehicle's 12v battery voltage.

Smartphone app note: A valid email address, smartphone, and Internet connection, are required to use the battery monitoring app. The app is free to download, and you can create a free login account after downloading the app. Full steps / instructions included.

Installation important note: Due to the LED viewing hole and other openings, the battery monitor is not IP rated. The sensitive electronics cannot be mounted in the engine bay or an unprotected area (e.g. frunk area) of an electric vehicle. Mounting in such a location will void your warranty. Please mount the device in the cabin, or boot instead.

** Fast EXPRESS SHOPPING to anywhere in Australia for orders over $199 **